Genuine parts and accessories designed to maintain the reliability and efficiency of your pneumatic and hydraulic starter systems — quick exhaust valves, mufflers, starter drives, temperature sensing valves, Y-strainers, and lubricators. Ships worldwide from Ajman, UAE.
Buy genuine pneumatic and hydraulic starter parts and accessories in UAE from an authorized distributor. We supply quick exhaust valves, mufflers, starter drives, temperature sensing valves, Y-strainers, and lubricators for marine and industrial starter systems across UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain and Egypt.
Dubai · Abu Dhabi · Saudi Arabia · Oman · Qatar · Kuwait · Bahrain · Egypt
Request price and get quote within 24 hours.
6 genuine components covering valves and starter drivetrain accessories — built to maintain reliability and extend the service life of pneumatic and hydraulic starter systems. Select by type below.
The QEV18 and QEV14 quick exhaust valves allow air to be exhausted quickly without returning to the control valve, providing faster disengagement of the starter after each start attempt. The simple assembly allows straightforward installation and cost-effective maintenance.
Genuine exhaust mufflers sized to match a wide range of pneumatic starter models, reducing exhaust noise during each start attempt while maintaining full air flow for reliable, consistent cranking performance.
Provides temperature protection for mechanical equipment, typically inserted into cooling or lubrication circuits and connected to indicators and shutdown controls. Each valve operates within a temperature level with various settings available, and automatically resets when temperatures normalize below the set point.
Complete range of starter drives to suit most brands of pneumatic and hydraulic starters, including pre-engaged and inertia types, with options for non-sparking BCB (Beryllium Copper) pinions for hazardous environments.
Y-pattern strainers installed in-line on air or lubrication supply circuits to filter out debris and contaminants before they reach the starter, protecting internal components and extending service life. Available in sizes to match a wide range of pneumatic and hydraulic starter installations.
Designed to inject a precise, controlled amount of lubricant into the starter air stream during each engine start attempt, helping reduce wear and ensure smooth starter operation. It mounts directly to the starter inlet port using a separate right-angle fitting, is compatible with diesel fuel or lightweight oil as the lubricating medium, and operates within an air pressure range of 45–150 psi and a temperature range of -28°C to 120°C. It delivers a lubrication rate of 0.5 cc per start with an operating lubricant pressure of 0–45 psi. For reliable performance, the lubrication line and valve must be completely purged of air before operation. The lubricator is equipped with durable Viton seals for enhanced chemical resistance and long service life, and features a 1/4" NPT lubricant inlet port and a 3/8" NPT valve connection port for easy installation.
Genuine OEM products with full manufacturer warranty and direct support access for UAE and GCC.
Deep expertise in pneumatic and hydraulic starter systems. We help you identify and source the right replacement parts and accessories.
Stocked in Ajman, UAE. Authorized distributor serving UAE, GCC, Egypt, Pakistan, Iraq, and Yemen. Most orders dispatched within 5 business days.
Non-sparking BCB pinion options and other hazardous-area-rated components for demanding installation environments.
Our engineers will help identify the right replacement parts or accessories for your starter system, send you the full technical datasheet, and provide a competitive quote.
A quick exhaust valve (like the QEV14/QEV18) lets air escape directly at the actuator instead of routing back through the control valve, speeding up starter disengagement after each start attempt.
Yes — starter drives are available with non-sparking BCB (Beryllium Copper) pinions for use in hazardous environments.
A Y-strainer is installed in-line on the air or lubrication supply circuit to filter out debris before it reaches the starter, protecting internal components and extending service life.
The G3 delivers 0.5 cc per start, operating within a 45–150 psi air pressure range and a -28°C to 120°C temperature range, with durable Viton seals for chemical resistance.
Absolutely. Rajkot Marine LLC is an authorized distributor. All products are 100% genuine, with full manufacturer warranty and certificates of origin.
We are authorized to distribute across UAE, GCC, Egypt, Pakistan, Iraq, and Yemen, with shipping also available to India and Southeast Asia. Most in-stock orders dispatch within 3–7 business days.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
