Engineered for extreme performance, the 975 000 series electronic hand throttle delivers precise and reliable engine speed control for the most demanding industrial environments. With a 90° travel angle, IP69K-rated sealing, and a wide array of factory-programmable outputs, this rugged lever controller is the ideal solution for mobile and stationary equipment where durability and accuracy are critical.
The 975 000 series is a heavy-duty electronic hand throttle designed as a direct replacement for mechanical cable systems, offering superior reliability and precision. Its primary function is to provide operators with a durable interface for manual speed control on a wide range of engines, from industrial machinery and off-highway vehicles to generator sets and marine vessels. The unit's hall-effect sensor technology ensures non-contact, wear-free operation, while its robust construction allows it to withstand extreme temperatures, high-pressure washdowns, and constant vibration, making it a cornerstone for reliable machine control in harsh operational conditions.
Engineered for extreme reliability, the 975 000 series combines hall-effect sensing, robust mechanical construction, and intelligent programmability for demanding industrial applications.
Key performance, environmental, and electrical data for the 975 000 series electronic hand throttle.
| Parameter | Specification |
|---|---|
| Model Series | 975 000 |
| Travel Angle | 90 Degrees |
| Ingress Protection Rating | IP69K (Dust and High-Pressure, High-Temperature Water Jets) |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +125°C |
| Electrical Connector | AMP 6-Pin |
| Output Signals (Factory Configurable) | Analogue, PWM, IVS, Current, CAN J1939, CANopen |
| Functional Safety Standard | ISO 26262 Part 5 – ASIL C (SEooC) for APS Dual 5V / APS CAN Sensors |
| Compliance Standards | FMVSS 124, FMVSS 302 (ECE R118), 72/245/EEC, ECE R10.06, E13 |
| Customization Options | Multiple Lever Positions, Inclined Lever, CAN J1939, Connector Kit, Custom Wire Harness |
The 975 000 series electronic hand throttle translates the physical position of its lever into a precise electronic signal that an engine or equipment control unit can interpret. At the core of its operation is a non-contact hall-effect sensor. As the operator moves the lever through its 90-degree travel arc, the sensor detects the exact angular position and converts it into a proportional electronic output. This output is factory-programmable to match a variety of control systems, such as a simple 0-5V analogue signal or a digital CAN J1939 message. The control unit then adjusts the engine speed or hydraulic flow accordingly, providing smooth, accurate, and repeatable command. By using hall-effect technology instead of mechanical potentiometers, the throttle eliminates wear from friction, ensuring long-term precision and reliability even in high-vibration environments where mechanical cables would fail.
The electronic hand throttle is factory programmable. It can be configured for Analogue, PWM (Pulse Width Modulation), IVS (Idle Validation Switch), Current, CAN J1939, or CANopen outputs to match your specific control system requirements.
IP69K signifies the highest level of ingress protection. It means the throttle is completely dust-tight (6) and can withstand high-pressure, high-temperature water jets (9K), making it ideal for environments that require rigorous washdowns, such as food processing, agriculture, or heavy-duty off-road applications.
Yes. The 975 000 series can be factory-configured to communicate via CAN J1939 or CANopen protocols, allowing for direct integration into modern vehicle and industrial control networks without additional interface modules.
Unlike traditional potentiometers that use physical wipers that wear out, a hall-effect sensor is non-contact and wear-free. This design choice ensures a longer operational life, consistent accuracy, and high resistance to damage from vibration and shock.
Yes. For specific APS Dual 5V and APS CAN sensor configurations, the throttle is designed and certified to meet ISO 26262 Part 5 requirements with an ASIL C rating, making it suitable for functional safety-related systems.
The unit is equipped with a robust and industry-standard AMP 6-pin connector, which provides a secure, weather-sealed electrical connection capable of withstanding harsh environmental conditions.
Our engineers will confirm the correct 975 000 series configuration for your specific equipment type, required output signal, and environmental conditions. Whether you need a standard lever or a custom CAN J1939 variant with an inclined handle, we provide full technical documentation and a competitive quote tailored to your operational environment.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
